Desg = Designated port
Root = Root port
Blocking = Blocking
Learn = Learning
List = Listening
Alt = Alternate port (Rapid Spanning Tree only)
Backup = Backup port (Rapid Spanning Tree only)
Discard = Discarding (Rapid Spanning Tree only)
Sts:
FWD = Forwarding
BLK = Blocking
Cost:
The amount the cost field of the BPDU will be increased upon entering the port.
Prio.nbr = the port ID
The Port ID is a two part number composed of the priority (128 by default) followed by the port number.
Type: Rapid Spanning Tree only
Edge = a port that connects to a non-spanning tree device.
P2P = full duplex link that connects to another spanning tree device
Shared = half duplex link that connects to another spanning tree device.
http://www.cisco.com/warp/ public/473 /146.html
http://www.cisco.com/unive rcd/cc/td/ doc/produc t/rtrmgmt/ sw_ntman/c wsimain/cw si2/cwsiug 2/vlan2/st papp.htm
http://www.cisco.com/warp/
http://www.cisco.com/unive
No comments:
Post a Comment